BenefitBeacon

← All tools

Square Footage Calculator

Working

Enter the length and width of a room and this square footage calculator works out the area in square feet, square yards and square inches. It also converts acres to square feet, so you can check a lot size or a plot of land the same way. Square footage is the number behind flooring quotes, paint estimates, rent comparisons and home listings, and getting it right before you order materials or sign a lease saves real money.

Illustration of rising bars and a coin, representing measuring a room in square feet.

Measure the longest wall. You can enter decimals, for example 12.5 for 12 feet 6 inches.

Measure the wall at a right angle to the length. For an L-shaped room, split it into two rectangles and add the two results.

What this calculator does

Square footage is simply the area of a flat surface, measured in square feet. For a rectangular room it is the length multiplied by the width, and this calculator does that multiplication and converts the answer into the other units people actually need: square yards for carpet and flooring, square inches for small jobs, and acres for land. If you are working out how much flooring to buy, how much paint a wall needs, or whether a rental listing's claimed size matches the rooms you measured, square feet is the number that settles it.

The acres mode works the other way. Land in the United States is usually listed in acres, but a builder, a fence company or a landscaping quote will often talk in square feet. One acre is 43,560 square feet, so a half-acre lot is 21,780 square feet. Enter the acreage and the calculator gives you the square-foot figure plus the same conversions, which makes it easy to compare a lot size with a house footprint or a garden plan.

Use it before you buy materials. Flooring, tile, sod and mulch are all sold by area, and suppliers usually suggest adding 5 to 10 percent extra for cuts and waste. Work out the exact square footage first, then add that allowance, and you will order close to the right amount instead of guessing and paying for a second trip or a pile of leftovers.

How this is calculated

For a rectangle, area = length × width, with both measurements in feet. The conversions are fixed: 1 square yard = 9 square feet, 1 square foot = 144 square inches, and 1 acre = 43,560 square feet. The calculator multiplies or divides by those factors, so every figure on the page comes from the same single measurement.

Source

The area formula is standard geometry. The acre is defined in U.S. customary units as 43,560 square feet, the value used by the National Institute of Standards and Technology in its handbook on units of measurement. Square yards and square inches follow from the definitions of the yard (3 feet) and the inch (1/12 of a foot).

Limitations

This calculator assumes a rectangle. Rooms with angled walls, bay windows, closets or L-shaped layouts need to be split into rectangles and added together, or the odd shapes measured separately. It does not add a waste allowance for materials, and it does not measure wall area for paint — for walls, measure each wall's length times its height and subtract doors and windows.

What each input means

Length. The longer side of the rectangle, in feet. Decimals are fine: 12.5 means 12 feet 6 inches. Measure wall to wall along the baseboard, not across furniture. Width. The shorter side, at a right angle to the length, also in feet. If the room is not a clean rectangle, measure the widest and longest points and treat the result as an upper bound, then break the room into rectangles for an exact figure. Acres. The size of a piece of land in acres, as listed on a deed, a survey or a property listing. Use this mode only for land; a room measured in acres would be a very small number and easy to misread.

How to read your result

The headline number is the area in square feet. Below it, square yards is the figure flooring and carpet stores use, because those materials are priced by the yard. Square inches matters for small surfaces such as a backsplash or a countertop cut-out. Acres puts a room or a building footprint in the same units as the land it sits on, which is useful when you are checking how much of a lot a house or an addition would cover.

Compare the result with any figure a seller or contractor gives you. If a listing says a bedroom is 200 square feet and your measurements say 132, the listing may be counting a closet, a hallway or an adjoining space — or it may simply be wrong. A tape measure and this calculator are the quickest way to check before you commit.

Worked example

A bedroom measures 12 feet long and 10 feet wide. Multiply 12 × 10 to get 120 square feet. Divide by 9 for square yards: 120 ÷ 9 = 13.33 square yards. Multiply by 144 for square inches: 120 × 144 = 17,280 square inches. Divide by 43,560 for acres: 120 ÷ 43,560 = 0.0028 acres. If you were buying carpet, you would order about 13.33 square yards plus a waste allowance, so roughly 15 square yards. A half-acre lot, in the acres mode, is 0.5 × 43,560 = 21,780 square feet, or 2,420 square yards.

Common questions

How do you calculate square feet of a room?

Measure the length and width of the room in feet, then multiply them together. A room 12 feet long and 10 feet wide is 12 × 10 = 120 square feet. For rooms that are not rectangles, split the floor into rectangles, work out each one, and add the results.

How many square feet are in an acre?

One acre is 43,560 square feet. A half acre is 21,780 square feet and a quarter acre is 10,890 square feet. The acre is a unit of land area, so it is the figure you will see on deeds, surveys and property listings.

How do I convert square feet to square yards?

Divide the square feet by 9, because a square yard is 3 feet by 3 feet. So 120 square feet is 13.33 square yards. Flooring and carpet are usually priced per square yard, which is why the conversion matters when you get a quote.

How do I measure an L-shaped room?

Split the L into two rectangles, measure each rectangle's length and width, work out each area, and add them together. Measure along the walls, and be careful not to count the overlapping corner twice.

Should I add extra when buying flooring?

Yes. Suppliers usually suggest adding 5 to 10 percent on top of the exact square footage for cuts, waste and spare pieces. Work out the exact area first with this calculator, then add the allowance — do not guess the area and the allowance together.

Related guides

Official sources

Benefit rules, amounts and application steps come from the administering agency. These links open the official agency home page in a new tab. Program pages link to the agency named on the page.