HOMES Rebate Estimator: Whole-Home Energy Savings Rebate
Working
The Home Owner Managing Energy Savings (HOMES) rebate pays for results, not equipment: the more energy a whole-home retrofit saves, the bigger the rebate — up to $8,000 for a low- or moderate-income household that cuts energy use by 35% or more. The program is funded by the Inflation Reduction Act and run by the states, which means the federal design sets the maximum and each state sets the program you actually apply to. This estimator works out the federal-design maximum for your income tier, savings tier and project cost, from the statute itself. It does not tell you what your state pays — no federal dataset lists state amounts or which states are open.
What this tool does
Pick your income tier and your modeled savings tier, enter the project cost, and the estimator works out the maximum rebate the federal design allows: the lesser of a dollar cap and a share of the project cost. For a low- or moderate-income household the caps are $4,000 (20–34% savings) and $8,000 (35% or more), at 80% of the project cost; for other households the caps are $2,000 and $4,000, at 50% of the cost. The result is the federal-design maximum — the state program decides what it actually pays.
How this is calculated
The rebate is the lesser of the dollar cap for the tier and the cost share. The caps and shares come from the statute, 42 U.S.C. §18795: for a single-family home occupied by a low- or moderate-income household (income below 80% of area median income), the rebate is the lesser of $4,000 or 80% of the project cost at 20–34% modeled savings, and the lesser of $8,000 or 80% of the cost at 35% or more. For other single-family homes, the rebate is the lesser of $2,000 or 50% of the cost at 20–34%, and the lesser of $4,000 or 50% of the cost at 35% or more. States may, with DOE approval, increase the amounts for low- or moderate-income households. Multifamily buildings have per-dwelling-unit caps under the same section; this estimator covers single-family homes.
Source
42 U.S.C. §18795 (Inflation Reduction Act §50121): rebate amounts, cost shares, and the low- or moderate-income definition (below 80% of area median income). U.S. Department of Energy, Home Energy Rebates Program Notice 26-1 (effective May 29, 2026): renames the program Home Owner Managing Energy Savings, makes the ENERGY STAR requirement optional, and streamlines program rules — it changes no rebate amounts, and states that all other program requirements remain in effect.
Limitations
This is the federal design maximum, not a state amount. States run the program: each state energy office sets its own application process, and some states have not launched a program a homeowner can apply to. The estimator covers the modeled-savings tiers for single-family homes; the measured-savings pathway pays a rate per kilowatt-hour saved, set by the state, and multifamily buildings have different caps. Savings must be modeled or measured — a contractor's estimate is not enough on its own. Retrofits must have begun on or after August 16, 2022 and be completed by September 30, 2031.
What each input means
Income tier compares your household income with the area median income for your area and household size, as HUD reports it. Below 80% is low- or moderate-income under the statute. Modeled energy savings is the percentage reduction in the home's energy use, estimated by an energy model before the work — 20% is the minimum for any rebate. Project cost is the total cost of the retrofit.
How to read your result
The result tells you which limit binds. If the dollar cap binds, spending more would not raise the rebate — a cheaper project at the same savings tier gets the same money. If the cost share binds, the rebate covers 80% or 50% of the cost and a bigger project would raise it up to the cap. Either way, the figure is a maximum: the state program may pay less, may restrict the program to lower incomes, or may not be open at all. Treat the estimate as the starting point for a conversation with your state energy office, not as money in hand.
Worked example
Take a low- or moderate-income household with a $10,000 retrofit modeled to save 35% of the home's energy. The rebate is the lesser of $8,000 and 80% of $10,000 ($8,000) — $8,000. The same project at 20–34% savings would pay the lesser of $4,000 and $8,000 — $4,000. A household at or above 80% of AMI with the same $10,000 project at 35% savings gets the lesser of $4,000 and 50% of $10,000 ($5,000) — $4,000. And a low- or moderate-income household with a $5,000 project at 35% savings gets the lesser of $8,000 and 80% of $5,000 ($4,000) — $4,000, because the cost share binds.
What to do next
Check whether your state has a launched HOMES program: DOE's Home Energy Rebates page links to each state program. Start with a home energy assessment — the program usually requires one, and it tells you which measures will reach the 20% or 35% tier. Get the savings modeled before signing a contract, and confirm with the state program what it pays: the federal maximum is not the state amount. Keep in mind that the federal 25C energy-efficient home improvement tax credit ended for property placed in service after December 31, 2025, so the rebate is now the main federal support for these projects.
Common questions
What is the HOMES rebate?
A federal rebate for whole-home energy retrofits, funded by the Inflation Reduction Act and run by state energy offices. It pays on the energy the retrofit saves — modeled or measured — rather than on the equipment installed. The program's statutory name is Home Owner Managing Energy Savings.
How much can I get?
The federal design maximum is $8,000 for a low- or moderate-income household (below 80% of area median income) at 35% or more modeled savings, and $4,000 for other households at that tier. At 20–34% savings the caps are $4,000 and $2,000. In each case the rebate is also limited to a share of the project cost — 80% for low- or moderate-income households, 50% for others.
Is the rebate available in my state?
It depends on your state energy office. Each state received federal funding, but only some states have a program a homeowner can apply to, and launched programs can be income-restricted, waitlisted, or partly closed. Check your state energy office or DOE's Home Energy Rebates page.
What counts as low- or moderate-income?
A household with total annual income below 80% of the median income of the area, as reported by HUD — or a household that has demonstrated eligibility for another federal program with income limits at or below 80% of area median income.
Do I need an energy model?
For the modeled pathway, yes: savings are estimated by an energy model before the work. There is also a measured pathway, where savings are verified from utility bills after the work and the state pays a rate per kilowatt-hour saved.
Did the May 2026 rule changes cut the rebate?
No. DOE Program Notice 26-1 (effective May 29, 2026) renamed the program, made the ENERGY STAR requirement optional, removed the Justice40 reservation, and streamlined rules — it changed no rebate amounts. The caps and cost shares in the statute stand.
Sources
- U.S. Code, 42 U.S.C. §18795 — Home energy performance-based, whole-house rebates (IRA §50121): rebate amounts, 80%/50% cost shares, low- or moderate-income definition.
- U.S. Department of Energy — Home Energy Rebates Program Notice 26-1 (effective May 29, 2026): program guidance changes; no rebate amount changes.